(800) 771-9182

COMM ONE CALL ACCOUNTING

FAQ Index: Ericcson

ERICCSON SMDR/CDR PHONE SYSTEM SETTINGS

• 6006 - Device type: 7 (unspecified terminal/printer)

• 6007 - Character set: 0 (no conversion)

• 6009 - IOU (except CPU-D4) Baud rate: 10 (2400 Baud)

• 6009 - IOU (CPU-D4) Baud rate: 10 (2400 Baud)

• 6009 - SMU (except CPU-D4) Baud rate: 8 (1200 Baud)

• 6009 - SMU (CPU-D4) Baud rate: 10 (2400 Baud)

• 6011 - Autoselect allowed: Yes (optional)

• 6017 - Mode selection for serial interface - should be RS-232 

• 6101 - Set year month day to : YYMMDD

• 6102 - Set Day of Week 1 - Sunday, 7 - Saturday 

• 6103 - Set hour minute second: HHMMSS

• 6104 - 12h mode, display - Set it to N for 24 mode

• 6201 - Log internal calls? - Yes

• 6202 - Log incoming calls? - Yes

• 6203 - Block log output? - Yes

• 6204 - Digits to log - Set it to NO

• 6205 - Bar outgoing calls for guest - Yes if you want to stop guest making calls while the pbx memory is full. Usefull for hotels. (optional)

• 6301 - Log outgoing calls? - Yes

• 6302 - Log duration time - Set it to 0 because you can configure it in the application.

• 6303 - Log minimum meter pulses - Should set it to 0

• 6304 - Bar outgoing calls? - Yes if you want to stop the outgoing calls while the calls storage if out of order and the pbx memory is full. (optional)

• 6305 - Dialed number: suppress - Set it to 0 unless you want to strip the last n digits from the dialed number for security reasons.

• 6306 - Log dialed numbers beginning with 0 - Yes.

• 6307 - Log dialed numbers beginning with 1 - Yes.

• 6308 - Log dialed numbers beginning with 2 - Yes.

• 6309 - Log dialed numbers beginning with 3 - Yes.

• 6310 - Log dialed numbers beginning with 4 - Yes.

• 6311 - Log dialed numbers beginning with 5 - Yes.

• 6312 - Log dialed numbers beginning with 6 - Yes.

• 6313 - Log dialed numbers beginning with 7 - Yes.

• 6314 - Log dialed numbers beginning with 8 - Yes.

• 6315 - Log dialed numbers beginning with 9 - Yes.

• 6332 - Log minimum cost - Set it 0

• 6403 - Call/Hotel FLEXIBLE CIL.

• 6404/6407 - Lines per page - Set it to 0

• 6402 - Automatic I/O activation - Set it to 1 minute. (0 means disabled)

• 6701 - I/O Port - Value ppiii where pp is board position and iii is individual number of a V24 (IO unit) port.

• 6702 - Lines/page - Set it to 0

ERICCSON SMDR DATA FIELDS

• Sequence #

• Call Time

• Extension Number

• Dialed Number

• Call Duration

• Call Duration (Seconds)

• Ring

• Trunk

• Sent Number

• Tag Identifier

• A-Number

• Transfer Conditions

• Call Type

• Call Direction